Leica MPS 30, L2, S8 APO, S6 T, S6 E, S6 D, MPS 60 user manual Eyepiece, Preparations, Bring the test

Page 28

Operating

Diopter adjustment If you adjust the diopters at the adjustable eyepiece as and setting described below, the focus will remain constant, or par- parfocality focal, from minimum to maximum magnification. In other

words, you will not have to refocus when you change magnification, but only when you want to examine a higher- or lower-positioned object segment. Make full use of this feature, which is not available on every stereo microscope.

Diopter adjustment is possible within a range from +5 to –5.

Every user has to make the following adjustments only once.

If you are using a graticule, the diopter adjustment and parfocality setting procedure is slightly different to that described here. Please refer to the section on measure- ment in the graticule user manuals.

 

Setting up diopter with an adjustable and a fixed

 

eyepiece

Preparations

￿ Set up illuminator.

 

￿ Set interpupillary distance (p.23).

 

￿ Set approximate working distance using the focusing

 

drive (see p.38–40 for the working distances of the

 

various objectives).

Bring the test

￿ Position a flat test object

object into focus

beneath the objective.

 

￿ Set the microscope to

 

minimum magnification.

 

￿ Close the eye that is

 

looking into the adjustable

 

eyepiece and look into the

 

fixed eyepiece with the

 

other eye.

 

￿ View the test object and

 

bring into focus with the

 

focusing drive.

28

Leica StereoZoom User Manual

Image 28
Contents Leica StereoZoom Contents Dear Customer Safety rules Use in Clean Rooms Service workSafety regulations Page Symbols Disregarding safety warnings can put persons at riskDescription Features StereoZoom Magnification Viewing Extras Angle StereoZoom Leica S4 E Leica S6 E Page Design Objectives EyepiecesHigh Eyepoint Eyepieces Design, Basic equipment Assembly Remove glass stage plate Undo locking deviceCheck that it sits firmly and snugly Page Eyepieces Place Leica S8 APO Page Operating OverviewInterpupillary distance can be Please also observe the note on pExit pupil Select the minimum magnification Position and the eyepiece/objective combination being used Operating Page Preparations EyepieceBring the test Set the microscope to Maximum magnification Special notes Test objectRegulating diopters Set lowest magnification DOC Remedy Equipment, first checkCare Protect yourMicroscope Dust and dirtCleaning To clean plasticsPlastic parts Safely useQuality Instrument, whose quality we guarantee HandlingWhich Leica instruments are renowned CH-9435 HeerbruggField diameter Magnification changer setting Objective magnificationEyepiece magnification On the eyepiecesOptical Data, Leica S4 E, S6 E, S6, S6 T, S6 D EyepiecesWith additional objectives Optical Data, StereoZoom S8 APO With incident-light stand Dimensions, Leica S4 E, S6 E, S6 TLeica S4 E, S6 E, S6 T With transmitted-light stand Dimensions, Leica S6 Dimensions, Leica S6 DWith inclining focusing drive Leica S6207 171 351 110 Ø76 134 223 Ø58 107 Dimensions, Leica S8 APO Leica S8 APO107 278 393 144 104 Leica Microsystems worldwide Leica Microsystems the brand for outstanding products
Related manuals
Manual 21 pages 3.42 Kb