iOptron ST-80 manual Setting Up Your Microscope, Setting Up Your Electronic Eyepiece

Page 3

Setting Up Your Microscope

Step 1. Setting the monocular.

Loosen the fastening screw (need picture), twist the monocular attachment to the desired position, and retighten the fastening screw.

Step 2. Setting the objective.

Rotate the revolving nosepiece to select the 4x objective.

Do not rotate the nosepiece by the objectives. Instead, use the ring the above the objectives

Step 3. Setting the mechanical stage.

Raise the stage with the focusing knob until it cannot go any further.

Focusing knob

Step 4. Setting the illumination unit.

Spin the illumination wheel to the lowest setting.

Step 5. Connecting the power.

Connect the power adapter to the microscope before plugging into the wall outlet.

Setting Up Your Electronic Eyepiece

Monocular

Electronic

Eyepiece

Step 1. Removing the eyepiece.

Remove the original eyepiece AND eyepiece attachment tube (inside) the monocular. Insert the electronic eyepiece into the monocular tube (as

shown in picture here).

Step 2. Connecting the electronic eyepiece to the computer via the USB cable.

USB

cable

Page 2 Page 4
Image 3
Page 2 Page 4
Contents #6810 ST-80 MicroscopeParts Diagram ST-80 MicroscopeAdditional Parts Setting Up Your Electronic Eyepiece Setting Up Your MicroscopeTransmission Microscopy Getting the image you want Setting up light penReflection Microscopy Attaching the light penHow to record your experiment User Guide for installing driver and softwareInstalling the Driver use a. or b Installing the softwareSaving and Exporting Files How to create a video or image sequence of your experimentIoptron ONE Year Microscope and Accessories Warranty
Top Page Image Contents