Shure manual BRH440M and BRH441M Broadcast Headsets, Care and Maintenance

Page 2

BRH440M and BRH441M Broadcast Headset

SAFETY PRECAUTIONS

The possible results of incorrect use are marked by one of the two symbols—"WARNING" and "CAUTION"—depending on the imminence of the danger and the severity of the damage.

WARNING: Ignoring these warnings may cause severe injury or death as a result of incorrect operation.

CAUTION: Ignoring these cautions may cause moderate injury or property damage as a result of incorrect operation.

CAUTION

Never disassemble or modify the device, as failures may result.

Do not subject to extreme force and do not pull on the cable or failures may result.

Keep the product dry and avoid exposure to extreme temperatures and humidity.

WARNING

If water or other foreign objects enter the inside of the device, fire or electric shock may result.

Do not attempt to modify this product. Doing so could result in personal injury and/or product failure.

This device is able to produce sound volume higher than 85 dB SPL. Please check your maximum allowed continuous noise exposure level based on your national employment protection requirements.

BRH440M and BRH441M Broadcast Headsets

The BRH441M Broadcast Headset and the BRH440M Broadcast Stereo Headset are developed especially for use in broadcast and media pro- duction. Circumaural ear cups block out background noise, and the dy- namic, cardioid microphone delivers natural, highly intelligible vocal re- production. Wearable on the left or right side, the flexible boom features a flip-up mute function that deactivates the microphone when raised ver- tically. A detachable cable with unterminated ends enables connection to a variety of devices, and is easily replaceable for a lifetime of use. The BRH440M features stereo monitoring, while the BRH441M leaves one ear open to the surrounding environment.

Closed-back, circumaural design provides excellent isolation from background noise

Dynamic microphone delivers natural, highly intelligible vocal reproduction with cardioid polar pattern and frequency response optimized for communication in loud environments

Ergonomic, lightweight design with adjustable, padded headband for long wearing comfort

Flexible boom microphone pivots 250 degrees for left or right side wear

Flip-up mute function deactivates the microphone when boom is raised vertically

Single-side, detachable cable with unterminated ends (stripped and tinned) enables connection to a variety of devices

User-replaceable cable, earpads, and windscreen for a long product life

Legendary Shure durability to withstand the rigors of professional use

WARNING

LISTENING TO AUDIO AT EXCESSIVE VOLUMES CAN CAUSE PERMANENT HEARING DAMAGE. USE AS LOW A VOLUME AS POSSIBLE. Over exposure to excessive sound levels can damage your ears resulting in permanent noise-induced hearing loss (NIHL). Please use the following guidelines established by the Occupational Safety Health Administration (OSHA) on maximum time exposure to sound pressure levels before hearing damage occurs.

90 dB SPL at 8

95 dB SPL at 4

100 dB SPL at 2

105 dB SPL at

hours

hours

hours

1 hour

110 dB SPL at

115 dB SPL at

120 dB SPL Avoid or damage may

½ hour

15 minutes

occur

 

Care and Maintenance

Clean using a soft, damp cloth.

CAUTION: Do not use cleansers that contain solvents. Keep liquid and foreign objects out of the driver openings.

WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm.

3

Image 2
Contents BRH440M/BRH441M Broadcast Headsets BRH440M and BRH441M Broadcast Headsets Care and MaintenanceDetachable Cable Wearing the HeadsetReplacement Parts Flip-Up Mute FunctionSpecifications Cable WiringZertifizierung CertificationHomologation CertificacionesLimited Warranty Limited Warranty Against DefectsGarantie Limitée Garantia LimitadaVSPQF.JEEMF&BTUGSJDB