Logitech BH870 manual Installation and setup

BH870 Wireless Bluetooth® Headset

Installation and setup

Step 1: Connect power to the travel charger

12V	Connect the mini-USB port on the
	Travel Charger to one of the following
	power sources:
	• any USB port on a powered-on
USB	computer via the supplied mini-USB-to-
	USB cable (charge time is longer when
	connected to a PC)
	• a mains power socket via the supplied
	mains power adapter
	• a car’s cigarette lighter via the car
	charge adapter (optional accessory)
Step 2: Insert the headset into the travel charger
See the figure below:	The headset LED shows the current charge
	status: red (low; <10%), yellow (medium;
	10–<100%) or green when fully charged.
	Allow the headset to charge until it lights
	yellow or green before continuing (usually
	the headset ships with a partial charge).

6  English