Using the Microphone, Replacement Parts, Material

Polarity

Positive voltage on cable conductor produces positive pres- sure.

Output Level (at 1,000 Hz)

94 dB SPL at ear with 1 mW input

Internal Connections

RED
CODED
TERMINAL	SHIELD
	SHIELD
	RED	2 1

		BLACK
	BLACK	MICROPHONE
	CODED	MICROPHONE
	CODED
	TERMINAL
		SHIELD
		SLEEVE
		WHITE

TIP

CODED	RECEIVER
TERMINAL

MATERIAL

Cable

2.1m (7 ft.) attached cables: one 2-conductor shielded with black 3-pin XLR connector (microphone) and one single-con- ductor shielded with 2-circuit phone plug (headphones).

Headset

Stainless steel and thermoplastic with foam earpads.

USING THE MICROPHONE

Snap the microphone boom into the rotating holder below the left earpiece. Put on the headset and adjust the earpads to the most comfortable position. The headset is designed for use with the mi- crophone mounted on the left side. Slide and twist the microphone boom and rotate its holder until the microphone is located as close as possible to the left corner of the mouth (not directly in front).

REPLACEMENT PARTS

Microphone Cartridge . . . . . . . . . . . . . . . . . . . . . .R93

Headphone Cartridge . . . . . . . . . . . . . . . . . . . . . .90FA2600

Pop Filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90RX1371

Foam Earpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49A78A

Dimensions

52mm (2 in.)

12.7mm (1/2 in.)

12 mm (15/32 in.)

14mm (9/16 in.)

15.9 mm

(5/8 in.)

203 mm

(8 in.)

MAX 180 mm MIN 130 mm (7 – 3/32 in. — 5 – 1/8 in.)

Net Weight

186 grams (6.5 oz.) including connectors

SHURE Incorporated http://www.shure.com United States, Canada, Latin America, Caribbean: 5800 W. Touhy Avenue, Niles, IL 60714-4608, U.S.A.

Phone: 847-600-2000 U.S. Fax: 847-600-1212 Int’l Fax: 847-600-6446 Europe, Middle East, Africa:

Shure Europe GmbH, Phone: 49-7131-72140 Fax: 49-7131-721414 Asia, Pacific:

Shure Asia Limited, Phone: 852-2893-4290 Fax: 852-2893-4055