Make/End A Call (If yellow light is not flashing on the headset turn headset on - see User Guide pg 14)
1.Put the headset on and position the microphone properly.
2.Put the headset in Talk Time mode*: Firmly press and release the multifunction button
on the headset for 1 second. The headset icon 
will light up on the right side of the base (This may take
3.Activate your phone by removing the handset from the cradle or by pressing the line or headset button. If the dial tone is too loud when you activate your phone, you can press the volume decrease button
4.To end the call, place the handset back in cradle, or press the line or headset button on the phone to end the call.
5. To end Talk Time, press the multifunction button for 1 second. The handset icon | will light |
up on the base within |
|
*If the headset icon is already showing on the front of the base, then the headset is already in Talk Time mode and you may proceed to step 3.
Adjust the Microphone Volume
The Microphone Volume Adjustment is located on the bottom of the B200 base . If the person on the other end of the call is having trouble hearing you, position the base as shown, and with a paperclip inserted in the slot of the knob, turn the knob clockwise to increase the volume. If they say your voice is too loud, turn the knob counterclockwise to decrease volume.
Answer/End A Call (If yellow light is not flashing on headset turn headset on - see User Guide pg 14)
1.Put the headset on and position the microphone properly.
2.Put the headset in Talk Time mode*: Firmly press the multifunction button on headset for 1 second, then release. The headset icon 
will light up on the right, front side of the base.
*If the headset icon is already showing on the front of the base, then the headset is already in Talk Time mode and you may proceed to step 3.
4.To end the call, place the handset back in cradle, or press the line or headset button on the phone to end the call. Press multifunction button for 1 second to end Talk Time. The handset icon should will light up on the base within
Adjust Speaker Volume
To adjust the volume in your earpiece, press the increase or decrease volume button for 1 second, then release. Repeat until volume is at desired level.
VISUAL AND AUDIO INDICATORS EXPLAINED
A brand of VXI Corporation
One Front Street. Rollinsford, NH 03869
www.blueparrott.comPN201955B
B200 Wireless Headset for Office Phone Systems
B200 Quick Start Guide
3. Remove handset from cradle or press the line or headset button to be connected to the call.