Chapter 2: Installation and Activation
This chapter describes how to install the TELKOM Ventus Mobile application to your mobile device. Note that only one device can be used for each email account. When you wish to change to a new device, the old device should be uninstalled first.
Please follow these steps to install TELKOM Ventus Mobile to your mobile device:
1.Copy the TELKOM Ventus Mobile installation package (.CAB file) to the device. There are several ways to do this:
a.install it over a cable that uses device management software e.g. ActiveSync (the cable usually comes with your mobile device)
b.send it over a Bluetooth connection from your PC (make sure Bluetooth is enabled both on the sending and receiving device)
c.storing it into a memory card that the device is able to read
d.send it over an infrared link from your PC
2.Start the Client installation by clicking the name of the installation file (.CAB). Locating the file depends on how you transferred the file (you can also use the search function of the file explorer to locate the file):
a.if you sent the file to your phone via Bluetooth or infrared, it appears in the My Documents folder
b.if you have the file on the memory card or transferred it via cable, open your phone’s File Explorer program and find the file from your disk or memory card
3.Select the language to be used (this screen shows only if your installer package contains several languages).