Nokia HS 3W Removing and installing the battery, Headset has a rechargeable Li-Polymer battery

Page 8

G e t t i n g s t a r t e d

Removing and installing the battery

Note: Before changing the cover, always switch off the power and disconnect the device from the charger. Always store and use the device with the covers attached.

The headset has a rechargeable Li-Polymer battery.

Open the battery cover by gently pushing the release button and sliding the battery cover backwards, see Figure 2.1.

Remove the battery, see Figure 2.2.

Detach the connector from its space and detach the battery from the connector, see Figure 2.3.

Replace the battery. Place the connector in the space reserved for it and set the battery in place, see Figure 2.4.

Close the battery cover, see Figure 2.5.

Make sure that the cover is properly locked in place, see Figure 2.6.

8

Image 8
Contents User’s Guide for the Wireless Clip-on Headset HS-3W Declaration of Conformity Contents Bluetooth wireless technology IntroductionCard in the sales package Getting started OverviewCharger connector Battery cover Chargers and batteriesRemoving and installing the battery Headset has a rechargeable Li-Polymer batteryWhen the battery charge falls low Charging the batteryPairing the headset with a compatible phone Disconnecting the headset from the phone Reconnecting the paired headset to the compatible phoneTroubleshooting Using the headset Using the headsetSwitching the headset on or off Call functions Answering and ending a callAdjusting the earphone volume Switching the call between phone and headset Resetting the headset Battery information Charging and DischargingCare and maintenance Keep all accessories out of the reach of small children