S e t t i n g s
USB data cable
You can use the USB data cable to transfer data between the phone and a compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite.
To activate the phone for data transfer or image printing, connect the data cable. Confirm USB data cable connected. Select mode. and select from the following options:
Nokia mode — to use the cable for PC Suite
Printing & media — to use the phone with a PictBridge compatible printer or with your compatible PC
Data storage — to connect to a PC that does not have Nokia software and use the phone as a data storage device
To change the USB mode, select Menu > Settings > Connectivity > USB data cable > Nokia mode, Printing & media, or Data storage.
■Call
Select Menu > Settings > Call and from the following options:
Call divert — to divert your incoming calls (network service). You may not be able to divert your calls if some call barring functions are active. See Call barring service in ”Security” p. 54.
Voice clarity > Active — to enhance speech intelligibility especially in noisy environments
Anykey answer > On — to answer an incoming call by briefly pressing any key, except the power key, the left and right selection keys, or the end key
Automatic redial > On — to make a maximum of 10 attempts to connect the call after an unsuccessful call attempt
Speed dialling > On — to dial the names and phone numbers assigned to the
Call waiting > Activate — to have the network notify you of an incoming call while you have a call in progress (network service). See ”Call waiting” p. 23.
Summary after call > On — to briefly display the approximate duration and cost (network service) of the call after each call
51 | Copyright © 2006 Nokia. All rights reserved. |