GE 26939 manual Troubleshooting Guide, Telephone

Page 77

TROUBLESHOOTING GUIDE

TELEPHONE

Problem

Solution

No dial tone

•

Check installation:

 

 

— Is the base power cord connected to a working outlet?

 

 

— Is the telephone line cord connected to the base unit

 

 

and the wall jack?

 

• Connect another phone to the same jack; the problem

 

 

might be your wiring or local service.

 

• Is the cordless handset out of range of the base?

 

• Make sure the battery is properly charged (12 hours).

 

• Is the battery pack installed correctly?

 

•

Did the handset beep when you pressed theTALK button?

 

 

Did the CHARGE/IN USE indicator come on?The battery

 

 

may need to be charged.

 

• Charge the handset for at least 20 seconds.

 

 

 

Dial tone is OK,

•

Make sure theTONE/PULSE switch on the base is

but can’t dial out

 

correctly set .

 

 

 

Handset/Base does

•

Make sure the handset RINGER switch is turned to ON and

not ring

 

the base RINGER switch is turned to HI.

 

• Move closer to the base.The handset may be out of range.

 

• You may have too many extension phones on your line.Try

 

 

unplugging some phones.

 

• Check for dial tone.

 

 

 

You experience static,

•

Change channels.

noise, or fading in and out

•

Move closer to base (cordless handset might be out of

 

 

range).

 

• Does the base need to be relocated? Make sure base is not

 

 

plugged into an outlet with another household appliance.

 

•

Charge battery.

 

 

 

77

Page 76 Page 78
Image 77
Page 76 Page 78
Contents 26939 FCC Registration Information Introduction Table of Contents Index Accessory Order Form Limited Warranty Before YOU Begin Parts ChecklistModular Jack Requirements Digital Security SystemInstallation on next Desktop InstallationPage This end up for wall use should be near the top of the unit Wall Mount InstallationRE View Plug the short telephone line cord into OFF button Answering Machine SetupSpeaker volume button Ring Select switch Announce button Recording the Outgoing AnnouncementSample Outgoing Announcement Messages indicator Messages IndicatorAnswering Machine Operation Screening Calls from BasePLAY/STOP button Message PlaybackReview buttons Erasing Messages Memory FullDelete button Erase buttonTo erase a message from the handset Leaving a MemoAnsw button Memo buttonRemote Access Stop Using the HandsetScreening Calls From the Handset Memory Full Accessing the Answerer from Another Location Changing the Security Code Program button Prog button SettingsLocal Area Code. you set Setting the Display Language Setting the Display Contrast Setting the Local Area Code RE View ID Program buttonRE View I D Volume control Volume ControlUsing the Base Press the Speaker button CHARGE/IN USE IndicatorIndicator Telephone OperationCHARGE/IN USE Speaker button indicator Duration Counter Manual Channel SelectionAuto Standby Channel buttonRinger volume switch Ringer Volume SwitchFlash Flash buttonRedial button Last Number RedialHold Hold indicator Hold buttonMute Finding the HandsetINT button ButtonFormat button Privacy ModeDisabling Privacy Mode Temporary Tone Dialing Tone button TONE/PULSE switchFull Duplex Speakerphone Operation Using the Base Unit SpeakerphoneReceiving a Call with Speakerphone Making a Call with Speakerphone Speaker button Volume controlSpeaker to Handset PressTALK on Switching Between Speaker HandsetHandset to Speaker Press Speaker Speaker buttonIntercom Operation Using IntercomIntercom Calling PAGE/INTERCOM buttonFrom the Handset USE indicator Advanced Intercom FeaturesUsing Intercom While YOU Have a Telephone Call INT button Format button PAGE/INTERCOM button PAGE/INTERCOM indicatorPress the PAGE/INTERCOM button INTERCOMbutton Indicator Intercom button Memory Memory button Storing a NAME/NUMBER MemoryFormat button REVIEWING, Changing or Deleting Stored Numbers VOLUME/ CID Review buttonsInserting a Pause Dialing Sequence Review buttons Handset Dialing a Stored Number During ReviewDialing a Stored Number Speaker button Memory button Base UnitMEM button Chain Dialing from MemoryMemo Receiving and Storing Call Records Caller ID OperationReviewing Call Records VOLUME/ CID Review buttonsPage CID Review Dialing a Caller ID NumberSeven digits Eleven digitsTen digits Speaker button Format button Deleting the Current Caller ID Record Volume CID Review DeleteDeleting ALL Caller ID Records Caller ID ErrorsCall Waiting Caller ID Changing the Battery Battery Safety Precautions Connecting the Belt Clip Connecting a Headset to HandsetHeadset and Belt Clip Operation Headset plug Slot forError Message IndicatorsHandset Sound Signals Telephone Troubleshooting GuideProblem Solution Unit beeps Battery General Product Care Causes of Poor Reception Service Index Page $18.35 $8.75 $36.35 $11.90 Page For how long after your purchase Limited WarrantyAtlinks USA, Inc

26939 specifications

The GE 26939 is an innovative and versatile lighting fixture that has gained popularity in both residential and commercial settings. Known for its modern design and energy efficiency, this product is a prime example of General Electric’s advanced technology in the lighting industry.

One of the key features of the GE 26939 is its LED technology, which ensures long-lasting performance while consuming significantly less energy than traditional incandescent bulbs. This efficiency translates into lower electricity bills and a reduced carbon footprint, making it an environmentally-friendly choice. The LED lights offer superior brightness and clarity, providing excellent illumination in various settings, from kitchens to office spaces.

Another notable characteristic of the GE 26939 is its exceptional lifespan. With an estimated operational life of up to 25,000 hours, users can expect to enjoy years of reliable service without the need for frequent replacements. This longevity not only enhances convenience but also contributes to reduced maintenance costs over time.

The GE 26939 is designed to be user-friendly and versatile, compatible with a variety of standard fixtures and sockets. Its sleek appearance allows it to blend seamlessly into any décor, making it suitable for both stylish residences and professional environments. Additionally, the product is available in various color temperatures, giving users the flexibility to choose the lighting ambiance that best suits their needs, whether it’s warm white for a cozy atmosphere or cool white for an invigorating workspace.

Furthermore, the GE 26939 is engineered with safety in mind. It is constructed with high-quality materials that exceed industry standards, ensuring durability and reliability. The fixture is also free from harmful substances, contributing to a safer indoor environment.

In summary, the GE 26939 stands out for its combination of energy efficiency, longevity, and aesthetic appeal. Its advanced LED technology not only provides exceptional brightness but also fosters sustainability. Its compatibility and safety features make it a smart choice for anyone looking to upgrade their lighting solutions. Whether for home or office use, the GE 26939 proves to be an exemplary lighting fixture that meets modern needs while prioritizing efficiency and design.
Top Page Image Contents