Feature Module | Lucent Technologies CIB 3020 instruction

Removing the 10-Basic Telephone Module

To remove the module from the control unit or expansion unit, turn the power switches to the off position, disconnect the modular cords from the 10-Basic Telephone Module and press down firmly on the latch at the module’s base until it releases Slowly slide the module out of the slot

Administering the Basic Telephones

Connected to Your 10-Basic Telephone Module

To assign lines to your basic telephones and administer access to outside lines, refer to the information below to locate the appropriate section of your administration manual for further instructions.

FEATURE MODULE 1

●If you have a square system, follow the instructions in the section titled “Assigning Individual Lines and call Restrictions to Voice Terminals” in your administration manual with the following exception: you cannot ad- minister the lines connected to jack A0 and A1 in the control unit for basic telephones People with basic telephones cannot place calls or receive transferred calls from these lines, or any other lines you do nol administer for their telephones Be sure that people with basic telephones have access to all the Iines they need to use.

●If you have a pooled system, follow the instructions in the section titled “Creating a Line Pool” in your administration manual. People with basic telephones dial 9 to access the line pool. If you assign additional lines to their telephones, people dial 88 to access an available line. Since the system selects the first available line, be sure to assign inter- changeable lines within the pool and lines to the telephone.

FEATURE MODULE 2

Refer to your administration manual’s section titled “Special Information About Basic Telephones” for instructions.

NOTE: If you have a pooled system and want people with basic telephones to receive calls on lines in different pools (other than the main pool), assign the pools to their telephones in the same way as they are assigned to voice terminals (see the section titled “Assigning Lines and Line Pools to Buttons” in your administration manual). Outside calls cannot be made on these pooled lines, but they can be received.

FEATURE MODULE 3

Refer to your administration manual’s section titled “Special Information About Basic Telephones” for instructions.

CIB 3020 specifications

Lucent Technologies CIB 3020 is an advanced platform designed to facilitate telecommunications and networking solutions, catering primarily to service providers, enterprises, and integrators. This integrated circuit board plays a crucial role in the performance and efficiency of communication systems, enabling high-speed data transfer and supporting a variety of applications.

One of the main features of the CIB 3020 is its versatility in multimedia and voice-over-IP (VoIP) applications. With the increasing demand for reliable and high-quality voice communications over the internet, the CIB 3020 incorporates advanced digital signal processing capabilities. This allows it to handle voice traffic efficiently, ensuring that calls maintain clarity and reliability even under high load conditions.

Another significant aspect of the CIB 3020 is its support for a range of connectivity options. The board comes equipped with multiple interfaces, including Ethernet and TDM (Time Division Multiplexing), enabling seamless integration with existing infrastructure and facilitating smooth transitions to newer technologies. This adaptability ensures that service providers can offer a wide variety of services without facing significant operational disruptions.

The architecture of the CIB 3020 is also noteworthy. It is designed with redundancy features that enhance its reliability and uptime. By utilizing failover mechanisms, the board ensures that services continue uninterrupted even in the case of hardware failures, making it a dependable choice for critical communication tasks.

In terms of performance, the CIB 3020 boasts high processing power and low latency, which are essential for real-time applications such as video conferencing and live streaming. Its ability to handle large volumes of data traffic without degradation in service quality makes it particularly valuable in modern networking environments, where speed and efficiency are paramount.

Furthermore, the CIB 3020 is engineered with scalability in mind. As businesses grow and their communication needs evolve, the board can be easily upgraded or expanded to accommodate increased traffic and additional services. This feature not only protects the initial investment but also supports long-term growth strategies for service providers.

Overall, Lucent Technologies CIB 3020 stands out as a robust solution for telecommunications and networking, offering advanced features, versatility, and reliability. Its ability to support new technologies while maintaining a high-quality service makes it an integral part of modern communication infrastructure.