Konftel 200/NI Calling13 If the R key does not work Pots, Programming the R key default setting =

Page 13

Calling13

If the R key does not work (POTS)

The requirements for the operation of the R key vary between PBXs and from country to country. Konftel 200/NI therefore lets you program the R- pulse time so that it works with most PBXs on the market.

Programming the R key (default setting = 2)

English

R-function

Press Menu.

Select Special Settings menu.

Press OK.

Choose R-function.

Press OK.

R2

Enter the value for the R-pulse. The default set- ting is 2. Check in the table below whether the setting is right for your PBX/country.

Value:	Time:	PBX/country:
R1	65 ms	Ericsson MD110
R2	100 ms	Scandinavia, Europe
R3	150 ms	Reserved
R4	270 ms	Germany, France, Israel
R5	600 ms	USA

Press the OK key to save the settings and exit.

Konftel 200/NI • User Guide

Image 13

Contents User guide Conference phone Konftel 200/NI English Contents Arrangements Bottom Description TopDigital Isdn S0 Connection Analogue PotsManual network selection default Auto Settings7 Network set-up after power on default AutoVideo line sharing Connection Own MSN-number default none Tuning Volume controlMute function Outgoing calls Calling Incoming callsIf your call is not answered 12Calling Three-party callsCalling13 If the R key does not work Pots Programming the R key default setting =Redial Speed dialling, redial Retrieve speed dial numbersMenu Add a new number in Phonebook Edit Menu Edit PhonebookMenu17 Delete Name and Number Adjust the Ring Signal VolumeSelect Language Menu Change Time and DateKeypad tone Off Menu19 Keypad Tone default onAccessories Remote control Accessories Remote control functions Accessories Extra microphones Spare parts Accessories and spare partsMaintenance TroubleshootingEuropean CTR3 Central UnitRemote control accessories Technical data Extra microphones accessoriesDisplay and keyset