Calling If your three-party call is not answered

Calling

If your three-party call is not answered

Press the R key followed by the 1 key to re- turn to the first call.

Note: The availability and function of the three-party feature can vary from country to country but also depend on the PBX to which the Konftel 100 is connected. If you want to connect multiple participants we recommend you use a telephone meeting service. If you have questions regarding availability, please contact your dealer.

If the R key does not work

The requirements for the operation of the R key vary between PBXs and from country to country. Konftel 100 therefore lets you program the R-pulse time so that it works with most PBXs on the market.

Programming the R key (default setting = 2)

Hold down the R key for three seconds until the green

LEDs flash and you hear three short beeps.

1-5...Enter the value for the R-pulse. The default setting is 2. Check in the table below whether the setting is right for your PBX/country.

Value:	Time:	PBX/country:
1–R function	65 ms	Ericsson MD110
2–R function	100 ms	Scandinavia, Europe
3–R function	150 ms	Reserved
4–R function	270 ms	Germany, France, Israel
5–R function	600 ms	USA

Press the OK key to save the setting and exit.

English

Konftel 100 • User Guide