Lucent Technologies and 4424LD+ Telephone, 4406D+, 4412D+, 4424D+ manual Place a, Call on, Hold

Call Handling

Place a	To place a call on hold:
Call on	1: Press the Hold				button.
Hold	2: To retrieve the call (or conference) on hold, press the line
		button next to the fast-flashing				Green Light (a call you put
		on hold) or the slow-flashing				Green Light (a call put on
		hold at another extension).
		When a call is on hold, the telephone beeps once each minute
		and			appears on the display.
Make a	While connected to the first party:
Conference	1: Press Conf .
Call	The system puts the call on hold and selects an EXT button.
	2: Connect with the next party.
		You can connect to the next party by:
			Dialing an outside telephone number or an extension.
			Retrieving a call on hold.
			Answering an incoming call.
	3: Press Conf again. Calls are now conferenced.
	Repeat Steps 1			3 to add up to a total of 2 outside and 2 inside
	(not including yours) parties.
	To drop a participant:
	1: Press the programmed Drop					button.
		The 4400-Series telephones do not have a fixed Drop button;
		you must program a Drop button onto a button.
	2: Press the line button of the party that you want to drop.

To put the conference on hold:

Press Hold .

To return to the conference:

Press any line button used to connect a participant.

To end the conference:

Hang up.