SETTING UP
1 - CONNECTING TELEPHONE
The plug at the end of the lead should be connected to the telephone socket.
Voltages present on the telecommunication network are classified
2 - RINGER SETTING
A switch located underside of the base unit allows the ringer to be switched ON or OFF.
Outgoing calls can still be made when the switch is set to the OFF position.
3 - RECALL TIMING
The switch is set to a RECALL timing of 100 ms which is used in most countries in the EEC.
If you have any problems with the RECALL function, please change the switch setting to 300 ms and try again.
If the problem persists, please contact your network operator.
USING THE TELEPHONE:
1 - ANSWERING INCOMING CALLS
When an incoming call is received, the telephone will ring. To answer the call lift the handset and speak.
2 - MAKING A CALL
Lift the handset, await the dial tone and dial required number. On completion of the call, carefully replace the handset in the cradle.
3 - LAST NUMBER REDIAL
If the telephone number you have called is engaged or if you want to repeat the call to the number you dialled previously, lift the handset, await dial tone and press the REDIAL button. The previously dialled number will be
AUTOMATICALLY RE-DIALLED.
4 - R, * & # BUTTONS
These are used with the new services provided on digital exchanges. For details please contact your network operator.
For product support and help visit our website
at www.geemarc.com telephone 01707 384438 or fax 01707 372529