CALLER ID SYSTEM OPERATION SOLAR4 CID
Subsription to Caller ID service from your local phone company is required before initial use.
1 - REVIEW YOUR CALL RECORDS
Use
or 
button to scroll browse throught the caller list. At the end of the call record list, you will see the “END OF LIST” message. Press either
or 
button to continue.
2 - SAVE CALL RECORDS
Save specific calls by deleting old or unnecessary call records. Note : Your phone stores up to 80 calls records before the memory becomes full. When the next call comes in, the oldest record automatically drops off and makes room for the new call record.
3 - DEL BUTTON AND FUNCTION
In the state of 
or 
button to select the number you wish to remove, press 
button, the LCD will show “DEL?” then press 
button again to remove this number, press other button to exit. If press 
button for about 6 seconds, the LCD will show “ALL DEL?” then press 
button to remove all numbers and the LCD will show “NO CALL”, press other button to exit.
When your Caller ID phone is in use mode, the timer will start after pressing 
button, then press 
button again to stop timer.
4 - USING THE CALL BACK FEATURE
Dial the dialled number, the unit can store up to 30 dialled numbers.
-In the state of 
or 
button to select the number you want to dial out.
-Pick up the handset, then press OK button to dial the phone number automatically.
Allows you to automatically dial the number of the person who has called previously.
-Lift the handset, listen for the dial tone.
-Select the caller that you want to call back by pressing 
or 
button.
-Press OK button to automatically dial the phone number of the caller shown on the LCD panel.
Note : the call back feature will not dial the phone number if the selected call record phone number is blocked or it is not available.
If the line is busy, hang up the phone to get a dial tone and then press
OK button again. You may also press 
button to dial the last
number dialed. | 11 |
|