Caller ID

Using FM transmitter when voice announcement function is off

If voice announcement function is turned off you can select any of the pre-programmed frequency channels in the following order:

			LED indication
Channel	Pre-	(FM Frequency selection mode)
Channel	programmed
No	Frequency	Battery	Call	Bluetooth	FM
	Frequency	Battery	Call	Bluetooth	FM
		status	status	status	status

1	88..1 MHz	off	off	on

2	88..3 MHz	off	on	off

3	88..5 MHz	on	off	off

4	88..7 MHz	off	on	on	Flash

5	88..9 MHz	on	off	on

6	89..1 MHz	on	on	off

7	89..3 MHz	on	on	on

To select the desired FM frequency channel, follow these steps:

-Connect your mobile phone and speakerphone..

-Press FM button to enter FM mode.. The default frequency channel is 88..1MHz

-Press the Volume Up or Volume Down button to move to the next/previous channel..

-Manually tune your radio to the same FM frequency and you are now ready to transmit calls or music from your phone to your car stereo..

Note1: While changing frequencies, FM Status Indicator flashes every 1 second..

Note2: While changing frequencies, a repeated beep-tone will be heard and frequencies can be recognized by the combinations of Status Indicators.. (See the table above..)

When you have an incoming call the speakerphone will announce the number of the caller.. If your radio supports RDS Text the phone number will furthermore be showed on the radio display..

english

Jabra SP700