USING THE PHONE
-Press the M1, M2 or M3 keys (for storing the number into one of these locations) or the MEM key followed by a digit 0 to 9.
To change a number already stored in Memory: simply follow the above procedure, and the new number will replace the number stored previously.
NOTE: If you are using the unit with a PABX which needs you to wait for an outside line, at step 3 always key in the 
/P key. The 
/P key inserts a 3 sec PAUSE when dialing. The display will show “P” followed by the number.
6 - DIALLING NUMBERS FROM MEMORY
- Press the 
key once or lift the handset.
The LCD will display the call timer as follows for example:
00-04
-Press the memory location key (s) i.e. M1, M2, M3 or MEM followed by a digit 0 to 9.
The digits being dialled will appear on the LCD display at the same time. For example:
0 1 7 0 7 3 7 2 3 7
The call timer will start.
11