Lenoxx Electronics IB-PH5595 operating instructions Trouble Shooting

TROUBLE SHOOTING (continued)

PROBLEMS CHECK

appears in the display

Cannot erase all records in memory

Call waiting does not show the number

Caller ID displays words like		,
or	or	or
.

Memory Dialing does not work

Handset falls out of phone base when wall mounted

Caller’s information is not registered to the Caller ID memory

Call Waiting or Message Waiting does not work

Pressing a Memory button does not display number

You picked up the phone before the second ring, or your phone received unclear call information. Static can cause this message.

If this condition persists, contact your local telephone company to ensure that there is no problem with your phone line.

To erase ALL call records, make sure the phone is not in use, press the DELETE button and hold for 3 seconds, the display will show “DELETE ALL?”, press the DELETE button again.

If an extension phone was picked up on call 1, this phone will not decode the call waiting, Caller ID signals, if the extension phone is not a call waiting caller ID phone.

Your language is set for French or Spanish. To reset the language, press the MENU button and then press the UP button, the display will go to the language setting, press the MENU button again then press the DOWN button. When is flashing, press MENU button to confirm. The language will be set to English mode.

Check if you have stored the numbers correctly by pressing that memory location button(s). Also numbers can only be stored when fresh batteries are installed correctly.

Handset clip was not installed properly for wall use. See page 14 for details.

The caller may have an unlisted or blocked number to prevent Caller ID identification, or it may be an overseas call or you may have noise on the line during that call.

Check with your telephone company if this service is available and if you have subscribed for it.

Your MEMORY button has no stored number. Please store the number again. Press the STORE button, dial the number and press the MEMORY locations you want.

NOTE :

1.If problems with your telephone service occur later, try to determine if the trouble is with the telephones you own or with the telephone company equipment. Unplug the tele- phone and try it on another jack in a different room or in a neighbor’s home to see if the phone line is bad or the phone.

If the known working phone does not operate properly on that line, contact your local telephone company for assistance.

2.If disconnection of your phone ends the problem, your phone may be the source of the trouble and it should be tested and repaired if necessary before it is re-connected.

3.There are no user maintainable parts or adjustments on this set. Should your phone

require repairing, contact us for instructions (except for cords which you can buy at any phone store).

17IB-PH5595-WM-E-032704

IB-PH5595-WM-E-032704.P65 19 4/8/2004, 3:17 PM