INSTALLATION INSTRUCTIONS
INSTALLATION
TELEPHONE BASE | HANDSET |
STRAIGHT TELEPHONE CORD
To Telephone Jack
COILED HANDSET CORD
1.Insert the modular plugs of the Coiled Handset Cord into the jack of the Telephone Handset and into the jack on the SIDE of the Telephone Base.
2.Insert the modular plugs of the Straight (not coiled) cord into the modular jack at the REAR of the Telephone Base and into the Telephone Wall Jack (either end can be plugged in).
This set is designed to |
| If you have a | |
connect directly to a | MODULAR JACK | jack, simply use a modular | |
modular jack | adaptor (not included). | ||
|
TELEPHONE LINE
RINGER ON/OFF SWITCH
This switch is located on the rear of the set. Select the desired function of the ringer. ON - Normal setting, rings on incoming calls.
O F F - The ringer does not sound, for undisturbed privacy.
NOTE: If your Ringer Switch is in OFF position, only THIS phone will not ring, other phones in your home on the same line will ring.
TONE/PULSE SWITCH
Select the type of dialing that you desire or that your telephone system requires. TONE - The phone will operate using tone dialing. (If your phone doesn’t dial out,
switch to PULSE.)
PULSE - The phone will dial using rotary pulse dialing .
NOTE: Even when your phone is set to pulse service, this phone can be switched to temporary tone dialing for access to services that require tone signaling like
computer systems. Just press the 
button after dialing in pulse and your buttons can now be used for tone signaling for this call only.
NOTE: When installation is completed, pick up the Handset to listen for dial tone before using speakphone for the first time.
6 |
| |
|
E