Grandstream Networks GXP-2010, GXP-1200 manual Software Upgrade & Customization, Key Pad Menu

Page 36

Software Upgrade & Customization

Software (or firmware) upgrades are completed via either TFTP or HTTP. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page.

FIRMWARE UPGRADE THROUGH TFTP/HTTP

To upgrade via TFTP or HTTP, select TFTP or HTTP upgrade method. “Upgrade Server” needs to be set to a valid URL of a HTTP server. Server name can be in either FQDN or IP address format. Here are examples of some valid URLs.

firmware.mycompany.com:6688/Grandstream/1.1.5.15

168.75.215.189

There are two ways to set up the Upgrade Server to upgrade firmware: via Key Pad Menu and Web Configuration Interface.

Key Pad Menu

To configure the Upgrade Server via Key Pad Menu options, select “Config” from the Main Menu, then select “Upgrade”. Under this sub Menu, user can edit Upgrade Server in either an IP address format or FQDN format. Choose “Save and use TFTP” or “Save and use HTTP” to select upgrade method. Select “Reboot” from the Main Menu to reboot the phone.

Web Configuration Interface

To configure the Upgrade Server via the Web configuration interface, open the web browser. Enter the GXP IP address. Enter the admin password to access the web configuration interface. In the ADVANCED SETTINGS page, enter the Upgrade Server’s IP address or FQDN in the “Firmware Server Path” field. Select TFTP or HTTP upgrade method. Update the change by clicking the “Update” button. “Reboot” or power cycle the phone to update the new firmware.

During this stage, the LCD will display the firmware file downloading process. If a firmware upgrade fails for any reason (e.g., TFTP/HTTP server is not responding, there are no code image files available for upgrade, or checksum test fails, etc), the phone will stop the upgrading process and re-boot using the existing firmware/software.

Firmware upgrades take around 60 seconds in a controlled LAN or 5-10 minutes over the Internet. Grandstream recommends completing firmware upgrades in a controlled LAN environment whenever possible.

No Local TFTP Server

For users who do not have a local TFTP server, Grandstream provides a NAT-friendly TFTP server on the public Internet for users to download the latest firmware upgrade automatically. Please check the Support/Download section of our website to obtain this TFTP server IP address: http://www.grandstream.com/firmware.html .

Alternatively, download and install a free TFTP or HTTP server to the LAN to perform firmware upgrades. A free Windows version TFTP server is available: http://support.solarwinds.net/updates/New- customerFree.cfm.

Grandstream Networks, Inc.

GXP User Manual

Page 36 of 38

 

Firmware 1.1.5.15

Last Updated: 12/2007

Image 36
Contents Page Table of Figures GUI Interface Examples Welcome Installation Connecting the GXP-2000 GXP-2000 w/GXP-ExtensionGXP-Extension Connection plate GXP-2000 Internal Headset Wiring Schema Product Overview GXP Product ModelsGXP Comparison Guide GXP Key Features in a Glance GXP Hardware SpecificationsGXP Technical Specifications Audio Features FeaturesUpgrades Server FeaturesUsing the GXP SIP Enterprise Phone LCD ButtonsLCD Icons AM PM GXP Keypad Buttons SendHandset, Speakerphone and Headset Mode Multiple SIP Accounts and LinesCompleting Calls Speed Dial Making Calls using IP Addresses For exampleReceiving Calls Do Not DisturbCall Waiting/ Call Hold Mute/DeleteVoice Messages Message Waiting Indicator Way ConferencingBusy Lamp Field Initiate a Conference CallGXP Call Features XML PhonebookCustomizable Idle Screen and Soft-buttons Configuration Guide Key Pad Configuration MenuConfigure Factory Functions Reboot Exit Audio UpgradeFactory Reset Diagnostic Mode All LEDs will light upKEY PAD GUI Call Flow Access the Web Configuration Menu DefinitionsDevice Configuration Status Device Configuration Basic SettingsDisable in-call Dtmf Headset ModeDisable Missed Call Display Clock insteadAdvanced Settings Use # as Dial KeyLocal RTP port Use RandomAuthenticate Conf FileAutomatic PhonebookSIP Account Settings Authenticate ID Authenticate PasswordUn-register on Reboot Retry Wait Time SIP T1 TimeoutDelayed Call Forward Enable Call FeaturesCaller Request Timer Callee Request TimerEnable 100rel Disable Multiple MediaSrtp Mode Account Ring ToneSpecial Feature Software Upgrade & Customization Web Configuration InterfaceKey Pad Menu No Local Tftp ServerManaging Firmware and Configuration File Download Instructions for local Tftp UpgradeRestore Factory Default Setting Instructions for Restoration
Related manuals
Manual 6 pages 26.42 Kb