Geemarc Ampli DECT150 manual General Settings, HOW to Connect the Phone and SET the Batteries

Page 10

GENERAL SETTINGS

1 - HOW TO CONNECT THE PHONE AND SET THE BATTERIES

1 - Plug the adaptor in the power wall socket and the power plug in the base socket (*).

2 - Connect the line cord plug to the base socket (**).

3 - Connect the line cord to the PTT socket.

4 - Insert the batteries with the correct polarity into the batteries compartment and replace the battery cover.

5 - Place the handset on the base unit then a short beep will be heard and the battery symbol will flash on the display, except if the batteries are

totally empty.

NOTE: Do not expose the base to electric equipment like TV, radio, monitors, sunlight, heat or other phones...to avoid any disturbances of your phone.

(*)Classified “hazardous voltage” according to EN60950 standard. (**) Classified TNV-3 according to EN60950 standard.

2 - CHARGING THE BATTERIES

The phone is supplied with NiMH rechargeable batteries. In standby mode, batteries are fully charged around 170 hours and talk time is around 8 hours. The battery

charge icon will flash as long as the phone is being charged and will stop when the charging process is complete. The phone has an automatic charging control to avoid excessive charging.

IMPORTANT: Batteries must be charged during 24 hours before using the phone for the first time.

Battery charge icon:

The handset display shows when the batteries are flat and when a warning signal is heard. If the phone does not have enough power or is not completly recharged, it switches itself off automatically until it is returned to the base unit.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Ampli DECT150 Index Additional Base Unit Sommaire TEL. Service Apres Vente Description Description Base Controls Controles SUR LA Base Base Connections Connections SUR LA Base HOW to Connect the Phone and SET the Batteries General SettingsCharging the Batteries Clean the Phone Phone RangeBase Settings Base Ringer VolumeGeneral Settings Icons Dipsplayed Handset SettingsHandset Ringer VOLUME, Melody and Shaker Handset Registration Handset DeregistrationNetwork FEATURES, Flash TIME, Dial Pause HOW to USE the Volume and Tone Functions Using the PhoneUSE the Call Back Features Making a CallTimer Paging the HandsetPhone Book Phone Book Handset Ring Tone SettingsAbout the Phone Book Dialling Using the Phone Book Storing a Number with a NameModify a Phone Book Entry Delete a Phone Book EntryDial CID Numbers Caller ID FeaturesCaller Identification Store Numbers and Names Into the Phone BookDelete Stored Names and Numbers Using Several Handsets General SettingsAdditional Handsets Deregister ALL Additional Handsets from the Base Internal CallsCall Transfer to Another Registered Handset Headset OptionHOW to ADD a Base Unit Additional Base UnitTrouble Shooting If the Phone does not WorkGuarantee GuaranteeTelephone 01707 Or fax 01707
Top Page Image Contents