Cortelco 2200 instruction manual Callback, Optionsbutton

CALLBACK

When reviewing received calls, there are two ways to dial the telephone numbers shown on the display by pressing DIAL.

1.With the handset in its cradle (on-hook), press DIAL. [PICKUP PHONE...]” will appear in the LCD display to ask you to pick up the handset. The number will be dialed after you pick up the handset.

HANDSET SYMBOL

2.If you pick up the handset, review the calls, and press DIAL, the displayed number will be dialed immediately.

Note: The HANDSET symbol will light up in the upper left hand corner of the LCD display when the handset is picked up.

If [SET AREA CODE] appears prior to [PICKUP PHONE...]” or dialing, it means you have not programmed the local area code. Please hang up the telephone and program the area code.

1. If a local call (a telephone number with the same area code as you set) is reviewed and its 7-digit number displayed, press DIAL to dial the number displayed.

2. If a long distance call (a telephone number with a different area code than you set) is reviewed and its 10-digit number (3-digit area code + 7-digit telephone number) is displayed, press DIAL to dial the number displayed.

OPTIONSBUTTON

The OPTIONS button allows you to change the format of the displayed number The available format follows:

If a local call, and its 7-digit number is displayed:

•Pressing OPTIONS once will change it to a 10-digit format (your area code + 7-digit number).

•Pressing OPTIONS twice will change it to an 11-digit number (1 + your area code + 7-digit telephone number).

15