Features of Your Telephone

TONE/PULSE SWITCH The TONE/PULSE switch, located on the side of your telephone, is used to set the type of dialing for your telephone to match the local service from your telephone company. The ‘P’ position is for Pulse dialing service. The ‘T’ position is for Tone dialing.

RINGER VOLUME CONTROL The 3-position switch (located on the side of the telephone) is used to set ringer volume.

HANDSET VOLUME CONTROL The 3-position switch (located on the side of the telephone) is used to set the handset volume.

STORE BUTTON The STORE Button is used to store numbers in memory locations for automatic dialing. You can store a maximum of 10 one-touch numbers with 15 digits maximum. To store a number lift the andset, press the STORE button and dial numbers (15 digits maximum), press the STORE button again and press the desired memory location button. Place the handset on-hook, or press the STORE button to continue storing numbers.

REDIAL BUTTON Your Patriot II telephone stores in memory the last nubmer dialed (31 digits maixmum). You can redial the last nubmer dialed by lifting the handset and pressing the RD/P button. This button must be the first button pressed after lifting the handset to activate the redial feature. You can erase the number stored in redial memory by lifting the handset and dialing any digit.

PAUSE BUTTON The PAUSE button can be used to program pauses in your memory locations.

FLASH BUTTON The FLASH button sends an interrrupt signal to the distant office. The interrupt is a 600-millisecond, timed line disconnect which tells the distant office that you wish to use an available feature. The results of a FLASH signal will depend on the services you have available. DIP switch selection located on the bottom of the phone allows for flash setting of 300 msec. or 600 msec.

HOLD BUTTON To place a call on local hold, press this button and return the handset to tht ecreadle (the hold LED will light). To retrieve the call lift the handset or, if the handset if off-hook, press the hold button.

DIP SWITCH The DIP switch located on the bottom of the phone priveds for:

a)Flash timing selection of 300 or 600 msec

b)Positive line disconnect option selection.

c)Pause time selection for 2 or 3.6 seconds.

d)A-Lead feature.