Pausebutton, Message Waiting Lamp, DIP Switch

To Dial A Phone Number In Memory

1. Lift the handset and wait for a dial tone.

2. To dial an auto memory button (located on top of base) - Press the desired auto memory button.

3. The number will be dialed automatically.

PAUSEBUTTON

The PAUSE button allows you to insert a 3.6-second pause in the dialing sequence. This is particularly useful if you are connected to a PABX system where you must dial an access code (usually the number 9) to obtain an outside line. It can also be used when storing numbers in memory locations to insert a delay in the dialing sequence.

MESSAGE WAITING LAMP

The Message Waiting Lamp will light when a message is waiting at a properly equipped PABX or telephone central office. This switch located under plastic memory index cover allows the phone to be configured for 90V message waiting on T/R (tip/ring, the red/green wires) or Y/B (the yellow/black wires).

T/RY/B

If this switch is in T/R Position then the message waiting lamp also serves as visual ring indicator.

DIP SWITCH

The DIP Switch located under the plastic memory index cover provides for:

a) Positive line disconnect option selection insures that any hookswitch depression disconnects the call.

b) A-Lead option selection used for special applications such as use with 1A2 Key Systems.

c) Pause time selection for 2 or 3.6 seconds.

On	1	2	3	4
On
Off
Off

Note: The current settings are in default position.

POSITION		ON	OFF
1.	Positive Line Disconnect	YES	NO
2.	A-Lead	YES	NO
3.	Pause	2 seconds	3.6 seconds