Cortelco 7150 instruction manual

Page 8

2.Connect the adaptor by plugging the AC power adaptor into the wall outlet and the adaptor tip into the jack at the rear side of unit. (Use only 9V DC. 200mA, center positive Class 2 adapter.)

3.Insert 4 AA Batteries into the battery compartment on the bottom of the telephone. The Low Battery icon is displayed on the Caller ID display when the battery volt- age is low. Batteries should be replaced at that time. (Batteries are not required for operation but to insure CID information is not lost during a power outage.)

4.Follow the procedure “Unit Setup” to set up your unit.

5.Place the unit on a flat table or mount it on a wall. Refer to page 6 for wall mounting instructions.

5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents
Trendline Caller ID Type Page Table of Contents Page Importantsafetyinstructions 7150 Answering Device SET UP/INSTALLATIONTelephone Usage Page Wall Mount Instructions Selectlanguage √ ENG ESP Unit SetupFactorypresets Enterareacode Telephone Part Identification Telephone Features PulseandtonedialingReceiving a Phone Call Placing a Phone CallTonebutton Automatic MemoryHandsetvolume REDIAL/PAUSEBUTTONHoldbutton FlashbuttonCall Waiting Display Caller ID Features If Your Service is FSKIf YOU are in AN Area Where AN FSK Signal is not Available Message LightReceiving Calls Reviewing CallsDeleting Calls Delete ALL ?Callback PickupphoneOptionsbutton Messageerror No Data SentPrivate Calls UnknowncallsTelephoneserviceproblems Maintenance Information Message Error Happens FrequentlyTelephonerepair Cortelco Repaircenter Sawyer Road CORINTH,MS38834Index Limited Warranty Cortelco
Top Page Image Contents