Clarity Telephone manual Announcement Switch

Page 20

Operating your JV-35

beep” sound. This confirms the JV-35 is ready to be programmed.

Fig. 22 - Announcement Switch

3.Press the desired Emergency button. After the “beep,” speak into the handset to record an announcement like “Police” or “Fire” for that button. Your recording can be up to three seconds long.

Fig. 23 - Emergency Button

4.After three seconds there will be a “beep” to tell you recording has stopped. Your recording will be played back immediately so you can check it, followed by a “beep-beep” sound.

5.Now you can repeat steps 3 and 4 if you want to change your announcement or if you want to record an announcement for a different Emergency button.

6.Otherwise, when you are finished recording, hang up the handset.

7.Slide the

ANNOUNCEMENT switch to the CUSTOM

E

N G L I S H

13

Image 20

Contents Page JVJV-35 Contents Important Safety Instructions Important Safety Instructions Additional Safety Notes for Canadian Users Important Safety Instructions Introducing the JV-35 Package Checklist Package ComponentsFeatures on the JV-35 HoldInstallation Desk Mounting Plug in the long phone cordLift the handset Listen for a dial tone Battery installation Operating your JV-35 Amplify ButtonTone Slide Redial Entering Number Dialing With An Emergency Button Lift the handset Operating your JV-35 Announcement Switch Announcement Different memory button Otherwise, when you Setting Custom AnnouncementsOperating your JV-35 Selecting Number Button AnnouncementsSetting Voice Announce Direct Audio Connection L I S H Troubleshooting Chart ActionRegulatory Compliance Do not Disassemble this Equipment Regulatory Compliance Party Responsible for Product Compliance Regulatory Compliance Regulatory Compliance Warranty Warranty Telephone systems or more sophisticated switching systems Specifications JV-35 L I S H