Telephone Operations
FLASH
BOOST 
CLARITY 
POWER
FLASH
BOOST 
Figure 12
H. Hold Button
To put the line on hold, simply press the HOLD button and return the handset to its cradle. Notice the red light HOLD indicator.When you pick up an extension phone on the same line, the P400 will disconnect. Putting the call on hold also mutes the handset.
I. Last Number Redial Button
The P400 phone remembers the last number dialed from the phone up to 32 digits. Lift the handset and simply press the REDIAL button to dial the last number dialed.
Figure 13
J. Flash Button
The flash feature is used to access special telephone functions and ser- vices available from your local phone company, such as: call waiting,
FLASH
BOOST
CLARITY
POWER
Figure 14
Troubleshooting
If any problem should arise during use of your P400 phone, try the suggestions listed below. Should the difficulty persist, contact Clarity or your authorized dealer for assistance.
SYMPTOM | CAUSE AND CORRECTIVE ACTION |
No dial tone | Check all phone cord connections. |
No number dialed when | No number stored in that memory button. |
memory button pressed | See “Programming The Photo Directory”, p. 12. |
Call cannot be dialed, or | See “Installation” section to |
is dialed slowly | reset the dial mode switch, p. 11. |
No audible ring | Make sure the ringer is not set |
14 | to “Off” position. |
|