SBC comm SBC-116 user manual Wall Mounting Instructions

Page 7

Wall Mounting Instructions

The unit can be mounted to any wall surface using two self-tapping screws (not supplied). Follow the instructions.

1.Install two self-tapping screws at a distance of 10.5cm (4.125”) from each other and located on a vertical center line. (See Figure 1)

CM v

&IGURE 

2.Tighten each screw just enough to allow the wall mounting bracket enough clearance to slip snugly over each screw head.

3.Pull out the mounting stand to the wall mounting position shown In figure 5.

&IGURE 

&IGURE 

4.To install as a wall unit.

a.Align the holes on the back of the telephone mounting plate with the heads of the self tapping screws.

b.Slowly slide the unit down until it snaps into place as shown in figure 6.

5.For desktop use, the mounting stand can be left flush to the base or raised to a medium or high position as shown in figure 3 and 4.

&IGURE 

&IGURE 

-/5.4).' 3#2%73

&IGURE 



Image 7
Contents SBC-116 £Ê œÌˆwV̈œ˜ÊÌœÊÌ…iÊœVÊ/ii«…œ˜iÊ œ“«˜Þ FCC Registration InformationTable Of Contents Feature List Safety Instructions Basic Connection Diagram Check the Contents of the BOXBattery Installation Connecting Phone Line CordsWall Mounting Instructions Message button Location Of ControlsFunctions Mute Function Volume FunctionRinger Volume Switch Pulse/Tone SwitchRe-Programming The Message Button Message ButtonTo review the number/name in phone book Function OperationsPhone Book To add number and name to the phone bookFlash Time Setting Call Waiting SettingDate Format Setting Hour Format SettingBack LIGHT/OFF Hook Light Setting Area Code SettingTime Setting LCD Contrast SettingCall from Talking CID SettingTalk Volume Talking Caller ID TcidPersonalizing Tcid Announcements Caller ID Call WaitingReviewing Display Messages Caller ID Call RecordsCaller ID System Operations Troubleshooting Warranty Case of difficulties, visit our service center at