LOCATION OF CONTROLS AND FEATURES
Menu Key [MENU]
Press to enter the menu which allows you to change telephone settings.
Quit Key [QUIT]
Used to quit caller ID review, directory review,
Redial/Pause Key [REDIAL/P]
The telephone will automatically redial the last number dialed when this button is pressed. It can also be used to program a pause of 4 seconds into a dialing sequence stored into a speed dial memory.
LOCATION OF CONTROLS AND FEATURES
Conference Key [CONF]
Used to join lines on hold to an active line to make conference call.
Volume Up and Down Keys [] []
Press to increase or decrease speakerphone, handset, headset or ringer volume between four levels.
New Call Indicator
The New Call Indicator flashes slowly to indicate there are new calls.
Flash Key [FLASH]
The [FLASH] key is used to access telephone company services, like call waiting.
Speaker Key [SPEAKER]
The [SPEAKER] key is used to begin or end a call using the speaker or headset instead of the handset. The LED on the [SPEAKER] key indicates the status of the speakerphone or headset. If the LED is off, the speakerphone and headset are inactive. If the LED is steadily lit, either the speakerphone or headset is in use. If either the speakerphone, headset, or handset is muted the LED will flash slowly.
Mute Key [MUTE]
While on a call, if you want to say something that you do not want to be heard by the person on the line, press [MUTE] to temporarily turn off the handset, speakerphone, or headset microphone.
Line Keys [LINE 1] … [LINE 4]
Press a line key to alternately go on or off hook. The LEDs on the line keys indicate the status of the line. If the LED is off, the line is on hook and inactive or the line is not connected to the phone line. If the LED is lit steadily, the line is in use, either by this phone or another phone connected to that line. If the line is on hold, the LED will flash slowly. When the line is ringing, it will flash quickly. If there is no line connected to the phone, when you press the line key it will light briefly and then turn off, no connection will be indicated on the LCD.
Hold Key [HOLD]
LCD Displays
3:27 PM 1/18
20 TOTAL CALLS
3:27 PM 1/18
HOLD: LINE 1
3:27 PM 1/18
BUSY: LINE 2
3:27 PM 1/18
RING: LINE 1
3:27 PM 1/18
LINE 4 : SPEAKER
When the telephone is not in use, the LCD displays the total Caller ID records on all lines or the number of new calls, if any.
If a line is put on hold by this telephone (eg. Line 1), the display shows the line number and its status as shown here. Other telephones connected to this line will know the line is in use.
When the telephone is not in use, if a line is being used by another telephone, the display shows the line number and its status.
When the telephone is not in use, if a line is ringing, the display shows Caller ID information. After 3 rings the display will show the line number and its status.
While a line is connected, the LCD display will show the line currently in use and which device (handset, speaker, or headset) is being used.
Press [HOLD] to put an active line on hold.
If multiple events are valid, the display will alternate between the messages.
9 | 10 |