GETTING STARTED
•Plug the AC POWER ADAPTER into a live electrical outlet and the DC POWER CONNECTOR into the back of the Base
Unit. |
|
| AC |
| OUTLET |
9V DC | TEL.LINE |
•Slide the Handset battery cover down, and remove it from the Handset.
PRESS and SLIDE
DOWNWARD
•Install the BATTERY PACK, with the metal contacts facing down and aligned with the Handset contacts. Replace Handset battery cover.
PLEASE NOTE THE
CORRECT POSITION
OF THE BATTERY
PACK WHEN INSTALLING
SLIDE IN THE
BATTERY
COVER
•Place the Handset into the Base Unit cradle. Make sure the Charging light is illuminated. Charge for at least 16 hours before first using the phone. The Handset can charge face up or down.
•Set the TONE/PULSE switch, located on the antenna side of the Base Unit, to the desired dialing mode. In most areas, TONE is the desired mode.
| RINGER |
|
OFF LOW HI | PULSE | TONE |
BASE RINGER |
| TONE/PULSE SWITCH |
SWITCH |
|
|
6