Oricom S209 manual Appendix, Troubleshooting

Page 52

Appendix

TROUBLESHOOTING

Problem

No dial tone

Signal icon flashing

No parking tone

Handset on the charger does not charge

No display

Bad audio (crackles, echo, etc.)

Handset does not ring

Caller ID does not display

Cannot make/answer a 2nd call

Tip

•Check all the phone line and power adaptor connections.

•The handset may be out of range of the base. Move closer to the base.

•The battery capacity may be low. Charge battery.

•The handset may be out of range. Move closer.

•If the handset displays NOT REG, it is un-registered. Register the handset. See page 9.

•The handset may not be placed properly. Try again.

•Charging contacts may be dirty. Clean contacts with a damp cloth.

•Turn on the handset tone. See page 35.

•Switch on the handset’s power. See page 10.

•The battery may be defective. Purchase new battery from your dealer.

•Check that the battery is inserted correctly.

•Make sure the handset is placed properly on the charger. The battery icon is animated while charging.

•Check that the battery is charged.

•Check the connections.

•The handset may be nearly out of range. Move closer.

•The phone base may be to close to an electrical appliance. Move the base unit to a different location.

•The phone base may be to close to thick concrete walls. Move the base unit to a different location.

•Check that the handset ringer is turned on. See page 35.

•Check that Do Not Disturb is turned off. See page 39.

•Too many phones may be sharing the same phone line. Disconnect some of the phones.

•Caller ID service may not be activated. Check with your service provider.

•The caller’s information may be withheld or is unavailable.

•2nd call service may not be activated. Check with your service provider.

•Check that the recall selection is correct. See page 38.

NOTES FOR OPERATION IN NEW ZEALAND

- 48 -

Page 51 Page 53
Image 52
Page 51 Page 53
Contents User Guide S209 8GHz Dect Dual line expandable cordless phone systemPage Table of Contents Table of Contents Environment and Safety Battery requirementsWhat’s in the Box? Welcome HOW to USE this User GUIDE?Need More HELP? About your Oricom S209 cordless handset HandsetAbout Your Phone Browsing the menusBase Handset IconsSMS Call LOG Settings Taking a glance at the menusConnecting Your Phone Connecting Your ChargerGetting Started Charging Your HandsetCall Checking the Battery LevelWall Mounting the Base What is Standby MODE? Checking the Signal StrengthSelecting your country Greeting YOU with HelloSwitching on your handset Switching off your handsetSetting the date Setting the timeCall Pre-dialingRedialing the last number Making a CallCalling from your phonebook Calling from the dialed listCalling from the call log Ending a Call Speed dialingAnswering a Call Adjusting the earpiece volume Using handsfreeAnswering a second call on the same line Muting the microphoneUsing the headset Intercom and Conference Calls While you are on the phoneCalling Another Handset Transferring a CallIntercom and Conference Calls Making a dual line conference callMaking a 3-way conference call Making a 4-way conference callErasing a single character Text and NumbersErasing all characters Setting up the service centre Setting UP SMS Service CentresSMS Text Messaging Australia only Activating SMSSMS Text Messaging Changing sub-addressAbout Mailboxes Organizing the Public MailboxDefining access matrix Activating a private mailboxLogging in to a mailbox Logging out of a mailboxChanging mailbox password Setting NEW Message AlertChanging mailbox name Closing a mailboxComposing messages Reading and Retrieving MessagesReturning a Call to the Sender Composing and Sending MessagesModifying a template message Replying a messageForwarding a message Copying a messageDeleting ALL Messages Checking the Mailbox Memory StatusVoicemail Indication and Notifications Phonebook Searching a recordDuring a call Calling directly from the phonebookEditing before calling Call LogAdding a Record Copying a record Assigning a speed dial keyMaking a call Cancelling a speed dial keyChecking the Memory Status Call Log Returning a callRedialing a call Sending a text messageReviewing the call timer Resetting the call timerViewing the Directory Services DirectoryCalling from the Directory Services Directory Setting your language Adjusting LCD contrastSetting your handset’s ringer Custom OptionsSetting the key tone Setting the handset tonesCustom Options Enhancing the audio qualitySetting the alarm clock Turning off the alarm clockYour Digital Assistant Starting the stopwatchSetting the timer Turning off the timerCountdown Timer Your Digital AssistantCalling Features Activating/Deactivating auto answerActivating/Deactivating do not disturb Selecting recall durationCalling Features Setting up the Pabx prefixActivating prefix insertion Deactivating prefix insertionDeactivating the Pabx prefix Activating call barringDeactivating call barring Call BarringExtra Features Reviewing the indication Extra FeaturesNEW Message Indication System REVIEWING/SELECTING Your CountryRegistering Your Handsets with Additional Base Selecting a Base UnitAssigning line 1 or line 2 In setting Assigning ring count settingSystem Defining Line MatrixResetting to Default Settings Changing the System PINDefault Settings AppendixTroubleshooting AppendixWarranty Customer Support

S209 specifications

The Oricom S209 is a state-of-the-art digital baby monitor designed to provide parents with peace of mind while ensuring their child's safety and comfort. This advanced device combines modern technology with user-friendly features for an enhanced monitoring experience.

One of the standout features of the Oricom S209 is its high-quality audio performance. With crystal-clear sound transmission, parents can easily hear even the faintest sounds from their baby's room, ensuring they are alerted to any needs or disturbances. The monitor also includes a two-way communication system, allowing parents to soothe their baby from another room without physically being there.

The Oricom S209 employs advanced digital transmission technology that reduces interference and enhances signal strength. This ensures a stable connection between the monitor and the parent unit, allowing seamless communication over significant distances without any interruptions. With a reliable range that extends up to 300 meters outdoors, parents can move freely around the house while keeping an ear on their little one.

Another noteworthy characteristic of the S209 is its user-friendly interface. The monitor features intuitive controls and a simple setup process, making it accessible for every parent. The easy-to-read LED indicators provide real-time feedback on sound levels and connectivity status, ensuring that parents are always informed about the conditions in their child's room.

Safety is a top priority, and the Oricom S209 addresses this with innovative features like an out-of-range indicator and a low battery alert. These notifications keep parents informed about the operating status of the monitor, offering reassurance that they can rely on it whenever needed.

The monitor also comes equipped with a night light feature that creates a calming environment for the baby. This gentle illumination can help ease nighttime fears and make it easier for parents to check on their baby without turning on harsh lights.

In summary, the Oricom S209 is an excellent choice for parents seeking a reliable and technologically advanced baby monitor. With its high-quality audio, digital technology for reduced interference, user-friendly interface, and additional features like two-way communication and night light, the S209 is designed to meet the needs of modern families while ensuring infants are monitored effectively and safely.
Top Page Image Contents