Diallingi lli ststoredr numbersrs
1.Lift the handset and wait for the dial tone.
2.Press appropriate button M1, M2, ..., M12, the stored number will be dialled automatically. For easy reference to your stored phone numbers use index located near the memory buttons on your phone.
Wallll Mountingti
To
Step 1: Slide out the clip, turn and slide back into the wall mounting position (located in the base unit, just below the hook switch). This will ensure that the handset stays firmly in position when on the wall.
Step 1 | Step 2 | Step 2 |
Step 2: Remove the desk stand on the base of the phone (see the diagram below).
Step 3: Drill 2 holes in the wall 80mm apart, insert wall plugs and wall mounting screws (not supplied). The screws should protrude from the wall by
Step 4: Install the line cord into the back of the phone and plug the other end into the telephone wall socket.
Step 5: Place the phone onto the
Screw 
head
| 80 mm |
| Wall mounting | 80 mm | |
| 7 mm |
| |||
|
| ||||
|
|
| |||
| Wall |
|
| ||
|
|
| |||
13 | 14 |