Oricom T5509 manual Alerts

Page 13

Alerts

To transmit to a radio that has QT noise filtering turned on:

1.Select the same channel and Interference Eliminator Code as the other radio.

2.Press to send a call tone. This allows your voice to pass through the QT noise filter on the receiving radio.

3.Press and speak normally.

Note: If you skip step 2, the beginning of your message may not be heard on the receiving radio.

For a 30-second period, starting after the last transmission, all transmis- sions received on the selected channel and code will pass through the QT noise filter.

Note: Channel 5 and 35 do not have the QT feature.

22

Image 13

Contents UHF-CB Recreational Two-Way Radio Page Safety and General Information Safety and General InformationTransmit and Receive Procedure Exposure To Radio Frequency EnergyElectromagnetic Interference/Compatibility Two-way Radio OperationOperational Warnings Safety and General Use While DrivingBatteries Battery Charger Safety InstructionsControl Buttons Model T5509 Using the Desk Stand Charger Optional Accessory Battery MeterGetting Started Page Talking and Listening Talking and ListeningTalk Range Checking the Channel Before TransmittingDuplex Mode Special FeaturesPush to Talk Timeout Timer Locking the KeypadSetting and Transmitting Call Tones Channel Busy IndicatorAlerts AlertsAlerts Handsfree Use Without Accessories iVox AccessoriesSetting the Sensitivity Level = High Sensitivity = Medium Sensitivity = Low SensitivityCopyright Information Copyright InformationWhat Is Not Covered By The Warranty Warranty