Oricom PMR1200 operating instructions Battery meter, Then switch on the main socket

Page 10

Getting Started

f. Charging the battery pack (using adaptor) Lift the charge socket cover located on the right side of the handset.

Insert the round connector of the 9.0V DC/200mA adaptor into the charge jack.

Plug the mains adaptor into a 240V AC, 50Hz main socket with the switch on the socket set to OFF.

Then switch ON the main socket.

Battery meter

Mic/spk jack Charge jack

The battery meter is located in the left corner of the LCD screen. It appears like a battery with three bars inside. These indicate the amount of power available. When the battery level reaches it minimum level, the unit will emit two beep tones and automatically it will power off.

Your PMR1200 can detect the battery charge in 4 levels; Battery charge at high level.

Battery charge at medium level.

Battery charge at low level. At this level, the radio will emit a “beep” sound for every 10 seconds in standby mode. TIP: At this stage, you need to recharge the unit at

once, otherwise the battery will run down totally. Battery charge at very low level. When the battery level reaches its minimum level, the unit will emit two beep tones and automatically turn off the power.

Important: You need to charge the unit for 10-14 hours.

CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Operating Instructions Page Table of contents For Vehicles fitted with Air Bags Information on Safe OperationRadio Antenna BatteriesBlasting Caps and Areas Transmit and Receive ProcedurePotentially Explosive Atmospheres Exposure to Radio Frequency EnergyRadio Operation and EME Exposure Electromagnetic Interference/CompatibilityMedical Devices Pacemakers People with pacemakers should Removing the Belt Clip Installing the Belt ClipInstalling the Batteries Pull the Belt Clip latch forward away from the unitCharging the battery pack Read these Safety Warnings before you charge the batteriesThen switch on the main socket Battery meterImportant You need to charge the unit for 10-14 hours Battery life Transmitting rangeLCD Screen Channel Number. Changes from 1 to 40 as Selected by the userTurning the Unit ON/OFF Setting the Ctcss sub-channelOperation Changing ChannelsTransmitting and Receiving TransmissionSetting the VOX Voice Activated Sensitivity Transmitting sending speechPress the PTT button to confirm your setting Call-Ring tone Press the Call buttonSetting the Dual Watch Mode Duplex operation via RepeatersTurning on/off Duplex on channels Channel 5 is emergency channel onlyAuxiliary Features Setting the Repeater functionKey Lock Operation UHF channels and frequencies Channel Frequency TableUHF channels and frequencies Warranty information Australia Warranty information Australia Troubleshooting Guide in this user guide Customer SupportPage Australia Customer Support

PMR1200 specifications

The Oricom PMR1200 is a highly versatile and reliable two-way radio designed for both personal and professional communication. It stands out in the market due to its robust build quality and user-friendly features, making it a favored choice for outdoor enthusiasts, event organizers, and team communicators.

One of the main features of the PMR1200 is its impressive range. The radio operates on the PMR446 frequency band, which allows users to communicate up to 10 kilometers in optimal conditions. This extended range is particularly beneficial for activities such as hiking, camping, and outdoor events where reliable communication is essential.

Powering the Oricom PMR1200 is a long-lasting battery life, with up to 16 hours of usage on a single charge. This means users can rely on their device throughout long days without the constant worry of needing to recharge. In addition to its rechargeable batteries, the PMR1200 also comes with a desktop charger for easy charging at home or in the office.

The device is equipped with 16 programmable channels, providing users the flexibility to find the best communication channel available, especially in crowded environments. In addition, the PMR1200 includes a built-in CTCSS privacy tone system, which helps to minimize interference from other radio users, ensuring clearer communication.

Another significant characteristic of the Oricom PMR1200 is its compact and lightweight design. This makes it easy to carry around on various adventures or while working on a job site. The robust housing of the radio also ensures durability, making it suitable for outdoor use in varying weather conditions.

For added convenience, the PMR1200 features a prominent LCD screen which displays channel information, battery status, and other vital settings. Additionally, the inclusion of built-in hands-free operation allows users to communicate without needing to hold the device, greatly enhancing functionality during active tasks.

Overall, the Oricom PMR1200 is an excellent choice for anyone in need of a reliable, high-performance two-way radio. With its impressive range, durable design, and user-friendly features, the PMR1200 stands out as a top contender in the field of communication devices. Whether for leisure or professional use, this radio provides the necessary connectivity to enhance any activity.
Top Page Image Contents