General Product Care

4.Select the function you want to use and press that number on the phone’s keypad you are using.

5.To end the call, hang up or press the “6” button while the menu is playing.

NOTE: The unit answers on the 10th ring if the unit is turned off or the memory is full. To access the answerer, enter the 3-digit security code after the beeps. If memory is full, playback your messages and erase some of them to restore memory. If the answerer is off, press 2 to turn it on. If you want to end a call while a message is playing, just press and release the “6” button twice on the phone you are using.

NOTE: After the unit plays the remote menu, it will wait 10 seconds for a command. If a command is not entered, the unit disconnects. The unit only allows two attempts at accessing the security code. If the second attempt is incorrect, the unit will end the call.

To keep your answerer working and looking good, follow these guidelines:

•Avoid putting it near heating appliances and devices that generate electrical noise (for example, motors or fluorescent lamps).

•DO NOT expose to direct sunlight or moisture.

•Avoid dropping answerer and/or other rough treatment.

•Clean with a soft cloth.

•Never use a strong cleaning agent or abrasive powder because this will damage the finish.

•Retain the original packaging in case you need to ship it at a later date.