RCA 25202 manual Connections and Setup

Page 9

Connections and Setup

4

6

3

5

If you have two telephone lines installed on a single jack, plug one end of the straight telephone line cord into the jack marked LINE 1+2 on the back of the base. Plug the other end into the 2-line wall jack.

If you have two separate telephone line jacks, plug one telephone line cord into the jack marked LINE 1+2 and another cord into the jack marked LINE 2. Plug the other end of each line cord into separate wall jacks.

NOTE: To use two line, you must have two telephone lines with unique telephone numbers. If you only have one telephone line, this phone will still operate, but only as a single line telephone.

5. Connect the handset cord:

Plug one end of the coiled handset cord into the side of the base and the other end into the jack on the handset, and place the handset in the cradle.

6.Check for a dial tone. Lift the handset and listen for a dial tone. If you hear a dial tone, the phone is properly installed.

9

Image 9

Contents Model Important Information Equipment Approval InformationInterference Information Table of Contents Memory Accessory Order Form Introduction Base Layout Connections and SetupParts Checklist InstallationImportant Installation Information Wall plateTelephone Jack RequirementsInstalling the Phone Connections and Setup Data Port Manually Setting the Date and Time Programming the TelephoneDisplay Language Hour Format Flash TimeLocal Area Code Call Alert ToneDisplay Contrast Regional Area CodesRestoring the Defaults Voice Mail Access CodesTelephone Operation Telephone OperationMaking Calls with the Handset Making Calls with the SpeakerphoneReceiving Calls with the Handset Switching Between the Speakerphone, Handset, and HeadsetReceiving Calls with the Speakerphone Receiving Calls with the Optional HeadsetCall Timer Pre-Dialing Telephone NumbersMute Hold VolumeFlash RedialDo Not Disturb ConferenceVoice Messaging Caller ID CID Caller IDSummary Screen Receiving and Storing CID RecordsSaving CID Records to Memory/Phone Directory Memory Reviewing CID RecordsDeleting a CID Record Deleting All CID RecordsCall Waiting Caller ID Memory Direct Access Memory & Directory MemoryStoring a Name and Number in Memory Reviewing Stored Names & NumbersStoring the Last Number Dialed Changing a Stored Name or NumberStoring a Pause Storing a FlashChain Dialing Dialing a Stored NumberDeleting All Directory Memory Troubleshooting Guide Other InformationDisplay Messages See solutions for No dial tone Phone does not ring General Product Care Service For how long after your purchase Limited WarrantyIf you purchased your product outside the USA Index Service Receiving Calls with To Order Accessory Order FormAtlinks USA, Inc

Related manuals

Manual 76 pages 52.88 Kb