Installing the Speakerphone

43-463.fm Page 6 Friday, August 13, 1999 9:06 AM

To make full use of the Speakerphone’s features, you must connect it to two tele- phone lines, each with its own telephone number. However, you can connect it to a single line.

Notes:

•The first Speakerphone you connect to the phone line is automatically set to Extension 11. Any additional Speakerphones you connect to the phone line will ring until you set its extension number (see “Setting the Station Extension Numbers” on Page 12).

•You must connect the Speaker- phone to the telephone lines before you plug in its AC adapter. Other- wise, each station will have the same extension number and the paging and intercom features will not work until you properly set all ex- tensions (see “Setting the Station Extension Numbers” on Page 12).

•You can connect your Speaker- phone directly to a single 2-line modular phone jack.

•If you do not have 2-line phone jacks, you can use 1-line modular phone jacks or combine two 1-line modular phone jacks using a 2-line coupler (such as RadioShack Cat. No. 279-401, not supplied).

•If your phone line jacks are not mod- ular jacks, you can update the wiring yourself, using jacks and adapters available at your local RadioShack store. Or, you can have the phone company update the wiring for you.

•The USOC number of the jack to be installed is RJ14C (for a 2-line phone jack) or RJ11C (for a 1-line phone jack).