Revolabs setup guide Configuring the SoundStation 2 Speakerphone

Page 3

Configuring the SoundStation 2 Speakerphone

CONFIGURING THE AUDIO MENUS OF THE SOUNDSTATION 2 SPEAKERPHONE

1.Press MENU Button

2.Press SELECT (Checkmark) for Settings

3.Scroll down to AUX AUDIO then Press SELECT

4.Use Soft Keys Right to select WIRELESS MIC then press SAVE

NOTES:

1.In this case, Revolabs only recommends using the wearable lapel microphone or using a third-party dynamic microphone with the Revolabs XLR adapter module. Please note that the volume levels of the Revolabs microphones are not adjustable.

2.The use of Revolabs boundary microphones (omnidirectional or directional versions) has been tested and found to be significantly louder than the SoundStation 2 microphones at a 3’ distance. Use of these microphones may overpower other users on the Polycom microphones (built-in console microphone and/or external microphones). As above, the volume levels of the Revolabs microphones are not adjustable.

Image 3 Revolabs setup guide Configuring the SoundStation 2 Speakerphone
Contents Requirements for connecting systems Connecting the Cables Configuring the SoundStation 2 Speakerphone