Notes:
•Recharge the battery pack anytime LOW BATTERY appears, or if the keypad beeps while you are on the phone.
•When you first use the phone after charging or recharging the battery pack, the phone might not work. Return the key- pad to the base for about 5 seconds to reset the security
•About once a month, fully discharge the battery pack by keeping the phone off the base until LOW BATTERY appears, or if the keypad beeps while you are on the phone. Otherwise, the battery pack loses its ability to fully recharge.
•If the STATUS/MESSAGE indicator does not light when you place the keypad on the base, be sure the battery pack and AC adapter are correctly and securely connected. Also, check the charging contacts on the keypad and base. If the contacts are dirty or tarnished, clean them with a pen- cil eraser.
•If the battery pack becomes completely discharged or the base loses power while the keypad is away from it, place the keypad on the base for about 5 seconds to reset the security access protection code. The keypad blinks once. If the keypad loses power, leave it on the base to charge the battery pack.
•If you are not going to use your phone for an extended period of time, disconnect its battery pack. This helps increase the battery pack’s usable life.
12 |
| Preparation | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|