Radio Shack ET-1119 owner manual Installing and Charging the Battery Pack

Page 8

43-1119.fm Page 8 Thursday, September 16, 1999 1:58 PM

5.Plug the modular cord’s other end into the wall plate jack, then align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.

1.Drill two holes 315/16 inches (100 mm) apart. Then thread a screw into each hole, letting the heads extend about 5/16 inch (8 mm) from the wall.

315/16

5/16

6.Plug the adapter into a standard AC outlet.

7.Press and lift out the handset holder, rotate it 180°, then snap it back into place so it holds the hand- set.

2.Plug one end of the supplied long modular cord into the TEL LINE jack on the back of the base.

3.Align the base’s keyhole slots with the mounting screws and slide the base downward to secure it.

8.Lift the base’s antenna to an upright (vertical) position.

Note: To mount the ET-1119 directly on a wall, you need two screws (not sup- plied) with heads that fit into the keyhole slots on the bottom of the base.

Follow the steps under “On a Wall Plate or Wall” on Page 7, then apply these ad- ditional instructions for placement on a wall.

8

INSTALLING AND CHARGING THE BATTERY PACK

The ET-1119 comes with a recharge- able Ni-Cd battery pack. Before using your phone, you must install the battery pack, then charge it for about 24 hours.

Page 7 Page 9
Image 8
Page 7 Page 9
Contents ET-1119 Features Important Caller ID Information Read this Before Installation FCC StatementContents On a Desk InstallationMounting the Phone On a Wall Plate or Wall Installing and Charging the Battery Pack Charge USE Setting the Dialing Mode Second Battery PackTurning Caller ID/ Call Waiting ON/OFF Setting the RINGER’S VolumeSetting Auto Talk Storing Your Area Code Adjusting Handset Volume Using RedialOperation Making and Receiving CallsMemory Dialing Using FlashPaging Storing a Name and Number in Memory Store Name appearsEditing or Deleting a Number in Memory Entering a PauseUsing a Headset Chain-Dialing Service NumbersTesting Stored Emergency Numbers Reviewing Memory NumbersFm Page 18 Thursday, September 16, 1999 158 PM Caller ID Operation Reviewing Caller ID RecordsStoring a Caller ID Record to Memory Caller ID MessagesDialing Numbers from Caller ID Record Deleting Caller ID RecordsTroubleshooting Fm Page 23 Thursday, September 16, 1999 158 PM Care and Maintenance Replacing Battery Pack FCC Wants YOU to Know LightningFm Page 27 Thursday, September 16, 1999 158 PM RadioShack

ET-1119 specifications

The Radio Shack ET-1119 is a compact and versatile electronic device that gained popularity in the late 1990s. Known for its multifunctionality, it combines several essential tools that appealed to hobbyists, professionals, and casual users alike. One of its standout features is its built-in digital multimeter, which allows users to measure voltage, current, and resistance with precision. This capability makes it an ideal device for diagnosing electrical issues in circuits and devices.

The ET-1119 also includes a frequency counter, a feature that was considered advanced for its time. With this tool, users can measure the frequency of signals, which is particularly useful for those working in radio communications and electronics. The frequency range is broad, accommodating a variety of applications from amateur radio to audio equipment testing.

In addition to these functionalities, the device offers an easy-to-read LCD display that provides clear readings, making it user-friendly even for those who may be less experienced with electronics. Navigation through its various modes and settings is intuitive, allowing users to switch between functions without difficulty.

Another characteristic that sets the ET-1119 apart is its portability. The compact design ensures that it can easily fit into a toolbox or be carried in a bag, making it a convenient option for mobile technicians and hobbyists alike. Its sturdy casing adds durability, allowing it to withstand the rigors of occasional drops or bumps.

Powering the ET-1119 is straightforward, as it typically employs standard batteries available at most stores, making it easy to replace when necessary. Additionally, the device is designed to conserve battery life, ensuring that users can rely on it during extended use without frequently changing batteries.

In summary, the Radio Shack ET-1119 combines essential electronic testing tools into one device, featuring a digital multimeter, frequency counter, and a user-friendly interface. Its portability and durable design enhance its appeal, making it a reliable choice for anyone needing accurate measurements in their electronic projects. Whether for professional use or personal tinkering, the ET-1119 remains a noteworthy option among handheld electronic devices, highlighting the innovative spirit of its era.
Top Page Image Contents