Radio Shack ET-917 owner manual Paging, Memory Dialing, Storing a Number in Memory

43-1087.fm Page 14 Tuesday, August 17, 1999 2:46 PM

PAGING

To page the person who has the hand- set or to locate the handset when the phone is not in use, press PAGE on the base. The handset beeps for 2 sec- onds.

MEMORY DIALING

You can store up to 10 numbers in memory, then dial a stored number by pressing a one-digit memory location number.

Each number you store can be up to 16 digits long.

Storing a Number in Memory

Note: An error tone sounds and the phone exits the programming mode if you wait more than 20 seconds be- tween each keypress.

14

1.Lift the handset. If the TALK/BATT LOW indicator lights, press TALK to turn it off.

2.Press MEMO. The TALK/BATT LOW indicator blinks.

3.Enter the number and any TONE/

mode changes or REDIAL/P entries (see “Entering a Pause” on Page 15).

Note: Each TONE/ or REDIAL/P entry uses one digit of memory.

4.Press MEMO, then enter the mem- ory location number (0–9) where you want to store the number. A tone sounds to indicate that the number is stored.

5.For each stored number, write the person’s or company’s name next to the appropriate location number on the supplied MEMORY direc- tory sticker. (Use a pencil in case you need to change the number later.)