2.Dial the service's main number.
3.When the service answers, press TONE/
. Any additional numbers you dial are sent as tone signals.
4.When you hang up, the phone auto- matically resets to pulse dialing.
USING PAGE/INTERCOM
You can use the phone as a
To page the base from the handset, press INTCM. The base and handset ring. Paging appears on the base's display and Paging Base appears on the handset's display. Press SPEAKER or INTERCOM on the base to answer the page. Both displays change to Inter- com.
To page the handset from the base, press INTERCOM. The handset and base ring. Paging Handset appears on the base's display and Paging ap- pears on the handset's display. Press TALK or INTCM on the handset to an- swer the page. Both displays change to Intercom.
In either case, if the called party does not answer within 1 minute, the paging stops. Press INTCM or INTERCOM again to restart paging.
To end an intercom call, press TALK on the handset, press SPEAKER on the base, or hang up the handset.
If a call comes in during an intercom conversation, only the base rings, but the person at the handset can also hear the ring through the intercom. Either per- son can answer the call by pressing TALK or SPEAKER once to end the inter- com call, then pressing TALK or SPEAK- ER again to answer the call.
Note: The intercom does not operate if the party being paged is already on a call.
TRANSFERRING A CALL BETWEEN THE HANDSET AND THE BASE
You can use the phone's intercom fea- ture to transfer a call between the hand- set and the base for a
To transfer a call from the handset to the base, press INTCM. The call is placed on hold, CHARGE/IN USE blinks, and Hold and Paging Base appear on the handset's display. When the person at the base answers, press TALK. The call is released from hold and trans- ferred to the base. To bring the handset back into the conversation for a three- way conference, press TALK again.
15