7.Align the base’s keyhole slots with the wall plate studs and slide the base downward to secure it.
8.Press and lift out the handset holder, rotate it 180°, then snap it back into place so it holds the handset.
9.Fully extend the base’s antenna and place it in a vertical position.
Mounting the Base Directly on the Wall
For this mounting method, you need two wood screws (not supplied) with heads that fit into the keyhole slots on the bottom of the base.
1.Drill two holes 315/16 inches apart. Then thread a screw into each hole, letting the heads extend about 1/5 inch from the wall.
8
2.Plug one end of the supplied mod- ular cord into the TEL. LINE jack on the back of the base.
3.Route the modular cord through the groove on the bottom of the base.
4.Plug the cord’s other end into a modular phone line jack.
5.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.