•The first time you use your phone after installing a new battery, the handset might not work or might sound an error tone when you press TALK. This might also occur when you recharge a battery that has been completely discharged.
If this happens, be sure RINGER OFF/ON is set to ON. Then return the handset to the cradle for 5 seconds. This resets the security access protection code.
Mounting the Base on a Wall Plate
Follow these steps to mount the phone on a standard wall plate.
1.Thread the attached modular cord through the thick strain relief slot under the base.
INSTALLING THE BASE
Placing the Base on a Desk Top
Follow these steps if you are placing the base on a desk, shelf, or table.
1.Place the handset on the base.
2.Place the base’s antenna in a ver- tical position.
3.Plug the attached modular cord on the back of the base into a modular phone line jack.
2.Thread the supplied AC adapter’s cord through the thin strain relief slot under the base.
3.Plug the attached modular cord on the back of the base into the wall plate’s modular phone line jack.
9