4.Route the adapter’s cord through the strain relief slot on top of the base.
5.Plug the adapter into a standard AC outlet.
6.Fully extend the base’s antenna and place it in a vertical position.
Mounting the Base on a Wall Plate
1.Plug one end of the supplied mod- ular cord into the TEL. LINE jack on the back of the base.
2.Route the modular cord through the groove on the bottom of the base.
3.Plug the cord’s other end into a modular phone line jack.
4.Insert the supplied AC adapter’s barrel plug into the DC IN 9V jack on the back of the base.
5.Route the adapter’s cord through the strain relief slot on top of the base and through the groove on the bottom of the base.
6.Plug the adapter into a standard AC outlet.
7