R"9#40+0)ýR"
Dispose of old batteries promptly and properly. Do not burn or bury them.
±"016'"±"
The USOC number of the jack to be installed is RJ11C (or RJ 11W for a wall plate jack).
plugged in to maintain the Caller ID and speed dialing memories.
If you do not replace the batteries promptly, your Caller ID and telephone memory information may be lost. Rý
5'.'%6+0)"#".1%#6+10
Select a location for your telephone that is:
•Near a telephone jack
•Not in the way of normal activities in the area
Your telephone connects directly to a modular telephone line jack. If your telephone wiring does not have a modular jack, you can update the wiring yourself using jacks and adapters (available at your local RadioShack store), or have the telephone company update the wiring for you. You must use compatible modular jacks that are compliant with Part 68 of FCC Rules.±
/1706+0)"6*'"2*10'
You can mount your telephone on a wall plate, directly on a wall, or place it on a shelf, desk or table.
1P"C"&GUMVQR
1.Plug one end of the supplied long modular cord into the LINE jack at the back of the base.
2.Plug the cord’s other end into a modular phone line jack.
3.Place the phone on a shelf, desk, or table near enough to the modular phone line jack so that there is no strain on the cord.
1P"C"9CNN"2NCVG"QT"9CNN
1.Press and lift out the handset holder. Rotate it 180°, and snap it into place so it will hold the handset in place when the phone is mounted on the wall.
2.Insert the mounting bracket’s two tabs into the matching slots opposite the keyhole slot on the underside phone’s base. Then press down and slide the bracket upward until the tabs snap into place.
3.Plug one end of the supplied short modular cord into the LINE jack at the back of the base.
4