Installation, Selecting a Location | Radio Shack ET-598 instruction

43-698a.fm Page 6 Friday, August 13, 1999 12:56 PM

INSTALLATION

SELECTING A

LOCATION

You can place the phone on a desk top or table, or mount it on a wall. Select a location that is:

•near an AC outlet

•near a telephone line jack

•out of the way of normal activities

•away from electrical machinery, electrical appliances, metal walls or filing cabinets, wireless inter- coms, alarms, and room monitors

•away from other cordless phones

The base’s location affects the hand- set’s range. If you have a choice of several locations, try each to see which provides the best performance.

MOUNTING/CONNECTING THE PHONE

To use both of the ET-598’s lines, you must connect it to two separate tele- phone lines. Each of these lines must have its own phone number. If you do not have two telephone lines, contact your phone company to get a second line.

You can connect your telephone to a 2-line modular telephone jack using the supplied 2-line modular cord.

Or, you can connect it to two separate 1-line modular telephone jacks using the supplied 2-line modular cord and a 1-line modular cord (such as Ra- dioShack Cat. No. 279-356, not sup- plied).

Notes:

•Two-line and single-line modular cords look alike but are wired dif- ferently. To use the ET-598’s two lines, use only the supplied two- line modular cord to connect to a two-line modular jack.

•You can also use the ET-598 with a single 1-line modular jack.

If your phone wiring does not have a modular phone jack, you can:

•Update the wiring yourself, using jacks and adapters available at your local RadioShack store

•Have the phone company update the wiring for you

Note: The USOC number of the jack to be installed is RJ14C for a two-line baseboard jack or RJ14W for a two- line wall-plate jack.

Caution: The supplied RadioShack adapter was designed specifically for your ET-598. Use only the supplied adapter.