Thursday, August 5, 1999 11:33 AM |
To redisplay the channel number for several seconds, simply press and release DISPLAY.
3.Repeatedly press CH s to select higher channels, or CH t to select lower channels. To move rapidly through the channels, hold down CH s or t.
4.Adjust OFF/VOLUME to a comfortable listening level.
5.Adjust SQUELCH to cut out the back- ground noise. Wait until there is no signal on the channel, then slowly turn SQUELCH clockwise until the background noise stops.
Note: Do not turn SQUELCH too far clockwise because you might also cut out weak signals.
6.To turn off the
19