ˆMemory Operation
You can store up to 10 numbers (up to 24 digits) in each phone’s memory.
Notes:
•To keep your accounts secure, we recommend you do not store your personal access code for services such as
•When storing numbers for special services (such as alternate
STORING A NUMBER
1.Press MEM on the cordless handset or MEMORY on the corded phone. C;CE# ## appears on the display of the chosen phone.
2.Within 12 seconds, press the memory location number
Note: To enter a number into the tenth memory location, press 0.
3.Press MEM or MEMORY on the chosen phone again. ;DJ;H D7C; 5 appears on the corded phone, and ;DJ;H D7C; appears on the cordless handset.
4.Enter the name (up to 15 characters) using the following table:
# Presses | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 |
| A | D | G | J | M | P | T | W |
|
|
|
|
|
|
|
|
|
|
2 | - | B | E | H | K | N | Q | U | X |
|
|
|
|
|
|
|
|
|
|
3 | * | C | F | I | L | O | R | V | Y |
|
|
|
|
|
|
|
|
|
|
4 | ! | ( | ) | $ | ‘ | ; | S | ? | Z |
|
|
|
|
|
|
|
|
|
|
Notes:
•If you make a mistake, press FLASH/DELETE on the cordless handset or DELETE on the corded phone to delete a letter.
If you are using two consecutive letters that reside in the same number key, press FUNCTION on the corded phone (or #/FUNC on the cordless handset) between the letters. For example, for “Tammy Smith,” enter
If you do not press any number keys
5.Press MEM or MEMORY on the chosen phone again.
;DJ;H J;B DKC8H appears.
6.Dial the desired number (up to 24 digits).
Note:
•If you enter ∗ or # in the stored number, the corded phone’s display shows 7 or X (respec- tively) instead.
•You must press a number key within 12 seconds, or the phone exits memory number storage setup.
7.Press MEM or MEMORY on the chosen phone again to store the number. The cordless handset or the corded phone sounds two long beeps.
Note: If you hear three short beeps, the number did not store successfully. Start again from Step 6.
8.Write down the stored name and number on the memory label provided.
Note: If the low battery warning tone sounds or BEM 87JJ;HO appears on the cordless handset’s display, recharge the battery within two minutes, or the numbers stored in memory will be lost.
Entering a Pause
In some telephone systems, you must dial an access code (9, for example) and wait for a second dial tone before you can dial an outside number. You can store the access code with the phone number. However, if you do, you should also store a pause after the access code to allow the outside line time to connect. After entering the access code, press PAUSE on the corded phone or REDIAL/CALL BACK on the cordless handset to enter a 2- second pause.
DIALING A NUMBER
Corded Phone
1.Press SPEAKER on the corded phone, or pick up the handset. ;DJ;H DKC8;H 5 appears.
2.When you hear the dial tone, press MEMORY. I;B;9J C;CE '#& appears.
3.Enter the memory location number
You can also dial a stored number by pressing MEMORY, then REVIEW : or ; (to display the desired number),
14 | Memory Operation |